Our Holley 2300 marine carburetor kit is made in the US and is ethanol ready. You want your carburetor to be dependable when operating your boat. That is why you would want this high quality 2300 marine carburetor kit.
Features:
Holley 2300 marine carburetor kit for OMC 3.0L. Includes a new fuel filter and check weight. New currently being produced. Meets or exceeds manufactures specifications. Fits only the carburetor numbers listed.
Holley 2300 Identification
There are several carburetor kits for the Holley 2300 so it is important to find the carburetor number and matching the carburetor number with one of our kits will insure you get the correct carburetor kit.
Most 2300 Holley carburetors had a tag which was attached to one
of the float bowl screws, Holley also did a good job of stamping the
front of the tower with the carburetor number. You are looking for the
LIST #. This is usually a 4 digit number, or a 5 digit number on marine
carburetors. A lot of carburetors will actually have the work LIST
stamped in front of the number. Also look for a designation like -A, or
-AAS. This further defines the carburetor number. Most kits will be
found ok with just the LIST number. You will find carburetor numbers
listed as R-2345A, or something similar. In this case the LIST # is
2345. Once the LIST number is found enter it in our search box and click
GO. The correct kit will be displayed.
PLEASE NOTE: This kit includes the needle and seats correct for the list numbers provided. We have found some of the aftermarket needle & seats use a different head. If your needle and seat has a solid top instead of a removable screw, you will need these longer needle and seats instead.
OMC 3.0L
Features
- Made in USA
- Check Weight Included
- Fuel Filter Included
- Needle & Seat Nut & Screw Included
- Instructions Included
Don't forget to replace the float. Nitrophyl floats tend to absorb fuel over time and should be replaced when rebuilding your carburetor.
Technical
Standard Green Accelerator Diaphragm
Rebuild kit, made in the USA from high quality ethanol ready parts. Everything shown in the photo is included in the kit, additional parts may be purchased by choosing your carburetor type in our main catalog. For additional help including rebuild videos, free manuals, and troubleshooting, please see our technical section.
For additional information see related tabs above.
To confirm this kit matches your carburetor number refer to the application/carb tab. To make sure you get the correct carburetor kit, please match your carburetor number with the list provided. This kit is good for the carburetor numbers listed only. No return on opened kits.
APPLICATIONS:
You must match your carburetor number to get the correct part.
CARBURETOR NUMBER - FLOAT:
R-803131A - FL79
R-80313A - FL79
R-803161A - FL79
R-80316A - FL79
R-80321A - FL79
R-80321A-1A - FL79
R-80385A - FL79
OMC
262 4.3L Fits only carb numbers listed exactly.
CARBURETOR NUMBERS:
