1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Holley Carburetor Parts
  5. 2140, 4000 Teapot 4 Barrel Parts
  6. Holley 4000 Teapot Carburetor Idle Mixture Screws 16-2-1
Holley 4000 Teapot Carburetor Idle Mixture Screws 16-2-1
Holley 4000 Teapot Carburetor Idle Mixture Screws 16-2-1

Holley 4000 Teapot Carburetor Idle Mixture Screws 16-2-1

1 Review(s)
Your Price: $5.95
10-32 x 1.069"
Part Number: 16-2-1
Availability: In Stock

Choose Options

*
Write a Review
Holley 4000 teapot carburetor idle mixture screws. Price is for 1 screw and you will need a set of 2.

SPECS:
  • Thread = 10-32
  • Overall length = 1.069"
  • Shaft = .9155"


Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.


When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Recently Viewed Items

Can't find what you need? Contact Us
TOP