2140, 4000 Teapot Holley 4 Barrel Carburetor Parts
Holley 4000 carburetor parts. This lists all parts that we carry for the Holley 4000 carburetor.
This is a 4 barrel carburetor sometimes referred to as a TEAPOT carburetor and at times a Firebox. The Holley carburetor got the firebox reputation because of the fires that resulted from fuel leaking outside the carburetor.
Ford used the 4000 from 1955-1957, including the police special which had dual 4000s mounted. Mercury used the 4000 carburetor in 1956 and Lincoln used the Holley 4000 from 1955-1956.
There is also the 2140 version that looks very similar to the 4000, which was used on the 1953-54 Lincoln. The Holley 4000 used a vacuum operated secondary, while the 2140 used a mechanical secondary.
Holley 4000 Identification - The carburetor number is located on the back side of the carburetor on the face of the flange. There may be multiple numbers, but the important
one is the LIST number. I.E. LIST 1161.
This is a 4 barrel carburetor sometimes referred to as a TEAPOT carburetor and at times a Firebox. The Holley carburetor got the firebox reputation because of the fires that resulted from fuel leaking outside the carburetor.
Ford used the 4000 from 1955-1957, including the police special which had dual 4000s mounted. Mercury used the 4000 carburetor in 1956 and Lincoln used the Holley 4000 from 1955-1956.
There is also the 2140 version that looks very similar to the 4000, which was used on the 1953-54 Lincoln. The Holley 4000 used a vacuum operated secondary, while the 2140 used a mechanical secondary.
one is the LIST number. I.E. LIST 1161.
In Stock
2140 & 4000 Diaphragm. Not included in carburetor kits. Hard to find.
Part Number SD5000
(16)
$24.95
In Stock
10 x 32 x .986". Holley 94. Compare taper at the end and overall length.
Part Number 16-2
(2)
$6.95
In Stock
10-32 x 1.069". Compare overall length & taper at the end.
Part Number 16-2-1
(3)
$5.95
In Stock
Thread: 1/2" - 27
Part Number 70-5B
(12)
$10.95
In Stock
Part Number GD5008
(1)
$44.95
In Stock
Part Number 70-45
(2)
$12.95
In Stock
9/16 x 24 1/2 x 20
Part Number 90-10B
(5)
$14.95
In Stock
Outer diameter = .665" Inner diameter = .203" Thickness = .203"
Part Number AP500
(7)
$4.95
In Stock
Power valve plug for Holly carburetors
Part Number 70-69
$4.95
In Stock
OD = 23/32" (.719") ID = .203"
Part Number AP102-1
$4.95
In Stock
6 x 32 5/16 Set of 10
Part Number 80-5
(2)
$6.95
In Stock
31cm length .67mm diameter
Part Number 85-292
$4.95
In Stock
2" x 12"
Part Number CC2
(11)
$4.95
In Stock
Part Number 85-901
$39.00