1. Home
  2. Carburetor Parts
  3. by Part Type
  4. Idle Mixture Screws
  5. Marvel Schebler Idle Mixture Screw Flat End - 16-154
Marvel Schebler Idle Mixture Screw Flat End - 16-154
Marvel Schebler Idle Mixture Screw Flat End - 16-154

Marvel Schebler Idle Mixture Screw Flat End - 16-154

Your Price: $6.95
Overall length = 1.5" Thread = 14-40
Part Number: 16-154
Availability: In Stock
Write a Review
Idle mixture screw for some Marvel Schebler carburetors. 

There is no conversion chart between carburetor numbers and idle mixture screws. To be sure you are getting the right screw, compare the size listed and the way the taper looks in the photo, to the original screw.

SPECS:
  • Overall length = 1.5"
  • Thread = 14-40
AMONG OTHERS MAY FIT:
  • Marvel Schebler
TECHNICAL:
  • Replace your idle mixture screws anytime they are broken, bent, or have visible grooves in them.
  • Adjusting the Idle Mixture Screws: 
    • The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.
    • First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.
    • Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.
    • When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.
REPLACES OE: 

APPLICATION:

Recently Viewed Items

Can't find what you need? Contact Us
TOP