1. Home
  2. Carburetor Parts
  3. by Part Type
  4. Idle Mixture Screws
  5. Carter Idle Mixture Screws 16-29
Carter  Idle Mixture Screws 16-29
Carter Idle Mixture Screws 16-29

Carter Idle Mixture Screws 16-29

2 Review(s)
Your Price: $6.95
1.452". Compare overall length (prox) and taper at the end.
Part Number: 16-29
Availability: In Stock

Choose Options

Write a Review
Carter RBS or AFB Idle Mixture Screws. Please be sure to measure your old screws to insure you are getting the correct screws. Price is for each screw.

  • Thread = 10-32
  • Overall length = 1.452"
  • Shaft = 1.25"

Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.

When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Recently Viewed Items

Can't find what you need? Contact Us