1. Home
  2. Carburetor Parts
  3. Carburetor Parts by Carburetor Types
  4. Rochester Carburetor Parts
  5. B, BC, BV 1 Barrel Carburetor Parts
  6. Standard and Idle Mixture Screws
  7. Idle Mixture Screw - 1.00 x 10x32, 16-15
Idle Mixture Screw - 1.00 x 10x32, 16-15
Idle Mixture Screw - 1.00 x 10x32

Idle Mixture Screw - 1.00 x 10x32, 16-15

1 Review(s)
Your Price: $6.95
10-32 x 1.16"
Part Number: 16-15
Availability: In Stock

Choose Options

Write a Review

Carburetor idle mixture screw for many of the 1 barrel carburetors. We carry idle mixture screws for most carburetors.

Inspect your idle mixture screw looking for scores, or a bent screw.

There is no conversion chart between carburetor numbers and idle mixture screws. To be sure you are getting the right screw, compare the size listed and the way the taper looks in the photo, to the original screw.

  • Thread = 10-32
  • Overall length = 1.16"
  • Shaft = .99"
  • Adjusting the Idle Mixture Screws: 
    • The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.
    • First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.
    • Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.
    • When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.
REPLACES OE: 7004597


Recently Viewed Items

Can't find what you need? Contact Us