1. Home
  2. Carburetor Parts
  3. Carburetor Parts by Carburetor Types
  4. Rochester Carburetor Parts
  5. 2G, 2GC, 2GV, 2 Jet 2 Barrel Carburetor Parts
  6. Standard and Idle Mixture Screws
  7. Rochester 2 Jet Idle Mixture Screw - 16-138
Rochester 2 Jet Idle Mixture Screw - 16-138
Rochester 2 Jet Idle Mixture Screw - 16-138

Rochester 2 Jet Idle Mixture Screw - 16-138

2 Review(s)
Your Price: $8.95
Small Bore 10-32 x 2.055"
Part Number: 16-138
Availability: In Stock

Choose Options

*
Write a Review
Rochester 2G, 2GC carburetor small bore idle mixture screw. A new spring is included. New, currently being produced.

Match with your old screw. The taper is the important part.

SPECS:
  • Thread = 10-32
  • Overall length = 2.055"
  • Shaft = 1.869"

Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.


When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Browse Similar Items

Recently Viewed Items

Can't find what you need? Contact Us
TOP