1. Home
  2. Carburetor Parts
  3. Carburetor Parts by Carburetor Types
  4. Rochester Carburetor Parts
  5. 2G, 2GC, 2GV, 2 Jet 2 Barrel Carburetor Parts
  6. Standard and Idle Mixture Screws
  7. Rochester Idle Mixture Screw - 16-102
Rochester Idle Mixture Screw - 16-102
Rochester Idle Mixture Screw - 16-102

Rochester Idle Mixture Screw - 16-102

2 Review(s)
Your Price: $6.95
10 x 32 x 1.825"
Part Number: 16-102
Availability: In Stock

Choose Options

*
Write a Review
Rochester 2G, 2GC, 2GV, 2 Jet carburetor idle mixture screw. Includes a new spring.

SPECS:
  • Thread = 10-32
  • Overall length = 1.825"
  • Shaft = 1.6105"
Screws are matched up by size and more important the taper on the end.

REPLACES:
  • 7041621
  • 2006E
APPLICATIONS:
  • 1962-70 GM V8
Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.


When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Browse Similar Items

Recently Viewed Items

Can't find what you need? Contact Us
TOP