1. Home
  2. Technical
  3. ROCHESTER
  4. Rochester Monojet Technical
  5. Monojet Rebuild
Rochester Monojet 1 Barrel Rebuild Instructions

Here we have two videos. Part 1 illustrates the dis-assembly of the Monojet. Part 2 illustrates the assembly process.

Rebuilding the Monojet 1 Barrel - Part 1 of 2

Monojet Rebuild

Rebuilding the Monojet 1 Barrel - Part 2 of 2


The Monojet has three parts. Float bowl top, float bowl and the throttle body.

What are the casting holes mentioned in the videos?
These are holes made by the manufacture that are used while casting the part. They don't do anything and do not go anywhere. If not sure if it is a casting hole, blow through it. Air should not go anywhere.

Float Bowl Assembly
Monojet Rebuild

Fast Idle Side
Monojet Rebuild


Can't find what you need? Contact Us
TOP