Carburetor AFB 4-barrel Accelerator Pumps
There are many pumps used on the Carter AFB carburetors, match your carburetor number to insure you are ordering the correct one.
Find the number using the illustration below as a guide, enter it in the search box at the top of the page, you'll be directed to the correct pump.
If you don't have the carburetor number, you'll have to match the pump by comparing the cup diameter and overall length of the existing pump.
This video shows you how to correctly measure the pump:
BEFORE INSTALLING YOUR PUMP
- Leather cup pumps: apply a couple drops of oil to the cup (do not soak!)
- Neoprene, rubber pumps: apply a dab of lithium grease to the cup
- Polish the pump well, using crocus cloth to provide a smooth glide. Most pump failures are from bad well surfaces.
In Stock
11/16" x 2.411
Part Number AP156
$24.95
In Stock
13/16" x 2.570". FEATURES: Delayer spring and retainer US manufactured Ethanol ready
Part Number AP464
(7)
$12.95
In Stock
ID .385 Length 1.580. US made
Part Number 66-15
(30)
$4.25
In Stock
ID .535 Length .940
Part Number 66-37
(10)
$3.95
In Stock
23/32" x 2.44"
Part Number AP141
(4)
$41.00
In Stock
3/4" x 2.20 Leather
Part Number AP213
(5)
$32.95
In Stock
11/16 x 2.290 Leather Cup. Leather cup US manufactured Ethanol ready
Part Number AP237
(12)
$32.95
In Stock
13/16 x 2.570. US manufactured Ethanol ready
Part Number AP488
(3)
$19.95
In Stock
11/16 x 2.365 Leather
Part Number AP105
(13)
$17.95
In Stock
3/4" x 2.400"
Part Number AP214
(6)
$39.95
In Stock
3/4" x 2.5"
Part Number AP499
(1)
$14.95
In Stock
13/16" diameter outside .50 diameter inside
Part Number AP332
(2)
$3.95