1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Rochester
  5. 2G, 2GC, 2GV, 2 Jet 2 Barrel
  6. Standard and Idle Mixture Screws
  7. Rochester Idle Mixture Screw - 16-102
Rochester Idle Mixture Screw - 16-102
Rochester Idle Mixture Screw - 16-102

Rochester Idle Mixture Screw - 16-102

1 Review(s)
Your Price: $6.95
10 x 32 x 1.825"
Part Number: 16-102
Availability: In Stock

Choose Options

*
Write a Review
Rochester 2G, 2GC, 2GV, 2 Jet carburetor idle mixture screw. 10 x 32. Overall length: 1.825. Includes a new spring.

Screws are matched up by size and more important the taper on the end.

Includes but not limited to carburetor numbers: 7042100


Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.


When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Related Items

Item In Cart Throttle & Choke Shaft Screw Assortment S104
In Stock
Part Number S104
(26)
$11.95
Item In Cart Screw - 10-32 x 1 1/2
In Stock
10-32 x 1 1/2" SET OF 10
Part Number 80-90
(1)
$4.95
Item In Cart Carburetor Screw - 10-32 x 7/8
In Stock
Rochester 2G, Autolite 4300, Motorcraft 2100
SET OF 10
Part Number 80-86
(1)
$4.95
Item In Cart Choke & Throttle Screw 6 x 32 x 5/16 - 80-5 (Set of 10)
In Stock
6 x 32 5/16 Set of 10
Part Number 80-5
(1)
$4.95

Browse Similar Items

Recently Viewed Items

Can't find what you need? Contact Us
TOP