Carburetor Parts Shopping Cart
Items:
(0)
Total:
$0
Rochester 2GC 2GE Carburetor Kit

Rochester 2GC 2GE Carburetor Kit

Your Price:$21.95
In Stock
Part Number:K4158

Recommended Add Ons. Total is updated in your Cart.

Primary GM Choke Pull-Off
$15.95
Rochester 2GC, 2GE, 2 barrel carburetor rebuild kit. Made of high quality parts made in the USA. You will not find a better kit than this one. More complete and better fitting.

Features:

MAKE
YEAR
MODEL
CYLS
BUICK
1975-77
231
6
BUICK
1975-77
350 5.7L A/T
8
OLDSMOBILE
1975-76
350 AT (EXC CALIF)
8
OLDSMOBILE
1975-77
231”
6
PONTIAC
1975-76
350 5.7L
8
PONTIAC
1976-77
231 3.8L
6

Also knows as a 2 Jet.
2BBL
2GC has an integral choke - choke mounted on the carburetor.


Rebuild kit, made in the USA from high quality ethanol ready parts. Everything shown in the photo is included in the kit, additional parts may be purchased by choosing your carburetor type in our main catalog. For additional help including rebuild videos, free manuals, and troubleshooting, please see our technical section.

For additional information see related tabs above.

To confirm this kit matches your carburetor number refer to the application/carb tab. To make sure you get the correct carburetor kit, please match your carburetor number with the list provided. This kit is good for the carburetor numbers listed only. No return on opened kits.

5 Stars
DON'T HAVE ONE
PURCHASED AS "BACKUP" TO HAVE ON HAND. I INSPECTED THE KIT AND IT APPEARS TO BE MORE THEN COMPLETE FOR MY APPLICATION AND BEST OF ALL,,,, IT'S MADE IN AMERICA. ITEM ARRIVED EARLIER THEN POSTED AND IT WAS A SUPER EASY TRANSACTION DEALING WITH MIKES BUSINESS. THANKS A TON
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from OREGON. on 8/16/2015
5/5
5 Stars
RETIRED
I MADE THIS PURCHASE BECAUSE I HAD TROUBLE FINDING A KIT THAT APPLIED TO MY CARBUREATOR, IT'S A "2 JET-GE" AND FINDING A KIT OR OTHER PARTS THAT STIPULATED THE "GE" PART NUMBER ARE RATHER HARD TO LOCATE. SO I BOUGHT THIS JUST TO HAVE ON HAND, HERE IN MY SHOP. WITHOUT OPENING IT, I DID A THROE INSPECTION THROUGH THE PACKAGE AND LOOKED TO BE GREAT. I'M STILL NOT SURE WHAT THE "GE" STANDS FOR BUT I'M ASSUMING IT TO BE "ELECTRIC CHOKE". ANY CLERIFICATION ON THIS SUBJECT, SURE WOULD BE APPRECIATED.. THANK YOU AGAIN FOR THE GREAT QUALITY OF PARTS AND I WISH YOU CHEER'S AND ALL THE BEST: GARY FISHER
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from WEST LINN , OREGON. on 8/8/2015
5/5
5 Stars
In the wine business
The kit I purchased went on a V6 Buick in my 57 Willys CJ5. The kit I got along with the instructional video made the rebuild very simple. I've done several rebuilds before but not doing them daily a little help was very appreciated. The most important thing was to truly set all adjustments as described. Think there were 14 in total. Need a vacuum source and defiantly a steel rule. But once bench adjusted and installed only a 1/2 twist of the idle jets were needed. The car accelerates and runs great. Very good kit n good bideo backup. Maybe wish the internal filter carriage was included but got that one and a in line at local parts store. Really no biggie. Good stuff!!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Northern california. on 7/16/2016
5/5
3 Stars
Carb KIt
Float valve assembly was too big a diameter to screw into chamber....rest of kit OK
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Prince George Canada. on 7/7/2016
3/5

Related Items

Recently Viewed Items

Can't find what you need? Contact Us
Rochester 2G 2GC Mercarb Carburetor Brass Float
Average Rating(80)
$11.95
[availability]
Rochester Main Jet
Average Rating(31)
$5.25
[availability]
Mercarb Carburetor Kit
Average Rating(132)
$43.95
[availability]