1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Holley
  5. 2280, 6280 2 Barrel
  6. Idle Mixture Screw
Idle Mixture Screw
Idle Mixture Screw

Idle Mixture Screw

1 Review(s)
Your Price: $6.95
10-32 x 1.391"
Part Number: 16-39
Availability: In Stock

Choose Options

*
Write a Review
Be sure to compare the measurements and taper with your old screw. There is more than one possible match for these carburetors. Most screws are 10-32 but the overall length varies.

Measures 10-32 x 1.391 overall length.

Among others fits:
Rochester Monojet
Holley 1909 - You will need 1
Holley 2280 - You will need 2
Ford 4300 - You will need 2
Ford 4350 - You will need 2


Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.


When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Related Items

Item In Cart Idle Mixture Screw Springs
In Stock
Part Number 66-51
(23)
$3.95
Item In Cart Carburetor Flange Gasket - Carter Holley Rochester
Item In Cart Choke Cover Gasket - G476
In Stock
Part Number G476
$2.95
Item In Cart Throttle Body Gasket - G1028
In Stock
Part Number G1028
$4.95

Recently Viewed Items

Can't find what you need? Contact Us
TOP