1. Home
  2. Carburetor Parts
  3. by Part Type
  4. Idle Mixture Screws
  5. Idle Mixture Screw - 1.406
Idle Mixture Screw - 1.406
Idle Mixture Screw - 1.406

Idle Mixture Screw - 1.406

Your Price: $6.95
Overall length 1.406
Part Number: 16-76
Availability: In Stock

Choose Options

Write a Review
Idle mixture screw, these can not be matched based on carburetor number, use the photo and dimensions to match yours. Overall length 1.406"

Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.

When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Related Items

Item In Cart Idle Mixture Screw - 10 x 32 X 1.311
In Stock
10-32 X 1.311"
Part Number 16-122
Item In Cart Rochester Monojet, 1 Barrel Idle Mixture Screw 10x32 1.722, 16-83
In Stock
Rochester Monojet 10x32 1.722
Part Number 16-83
Item In Cart Holley 1946 Idle Mixture Screw - 16-143
In Stock
6 x 32 x 1.187"
Part Number 16-143
Item In Cart Idle Mixture Screw - 1.360
In Stock
Overall length 1.360"
Part Number 16-64

Recently Viewed Items

Can't find what you need? Contact Us