1. Home
  2. Carburetor Parts
  3. by Part Type
  4. Idle Mixture Screws
  5. Idle Mixture Screw - 1.284
Idle Mixture Screw - 1.284
Idle Mixture Screw - 1.284

Idle Mixture Screw - 1.284

Your Price: $8.95
Overall length 1.284"
Part Number: 16-157
Availability: In Stock
Write a Review
Idle mixture screw, these can not be matched based on carburetor number, use the photo and dimensions to match yours. Overall length 1.284"

Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.

When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Related Items

Item In Cart Holley  Carburetor Idle Mixture Screw 16-45
In Stock
10-32 x .998"
Part Number 16-45
Item In Cart Rochester Idle Mixture Screw - 16-102
In Stock
10 x 32 x 1.825"
Part Number 16-102
Item In Cart Idle Adjusting Screw Import
In Stock
1.28" .5mm .20" diameter
Part Number 16-108
Item In Cart Idle Mixture Screw - 1.237
In Stock
Overall length 1.237"
Part Number 16-56

Recently Viewed Items

Can't find what you need? Contact Us