1. Home
  2. Carburetor Parts
  3. by Part Type
  4. Idle Mixture Screws
  5. Idle Adjusting Screw Import

Idle Adjusting Screw Import

Your Price: $5.25
1.28" .5mm .20" diameter
Part Number: 16-108
Availability: In Stock
Write a Review
Import idle adjusting screw.

Adjusting the Idle Mixture Screws

The idle mixture screws only affects idle. They simply control the amount of fuel and air mixture that is delivered at idle.

First run the screws in all the way until they seat, lightly. Too hard and you will damage the screw. Now back the screw out until the specified rpm is achieved. Turning the idle mixture screws clockwise (in) leans the idle mixture. Turning the idle mixture screws counter clockwise (out) richens the mixture.

Turn the mixture screws, alternating between the two in 1/4 turn at a time until the engine rpm starts to drop, then turn them back out 1/4 of a turn.

When adjusting your idle mixture screws doesn't seem to change the engine rpm much is an indication that there is something wrong and could be an indication of a needed rebuild.

Related Items

Item In Cart Autolite Holley Motorcraft Idle Mixture Screw 16-73
In Stock
10-32 x 1.375"
Part Number 16-73
Item In Cart Carter BBD Carburetor Idle Mixture Screws 16-91
In Stock
10-32 x 1.502"
Part Number 16-91
Item In Cart Rochester Quadrajet Carburetor Idle Mixture Screws 16-139
In Stock
Rochester Quadrajet carburetor idle mixture screws. Good for the later Quadrajets. 80's.
Part Number 16-139
Item In Cart Idle Mixture Screw - 16-149
In Stock
10 x .32 x 2.07
Part Number 16-149

Recently Viewed Items

Can't find what you need? Contact Us