1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Carter

Carter

Carter 1, 2 & 4 barrel carburetor parts. Carburetor kit, floats, pull-offs & thermostats. Made in the US. Ethanol ready.

Without a doubt Carter made more carburetors for the automotive manufactures than any other carburetor company. Almost every vehicle type had some form of Carter carburetor one time or another.

Carter carburetors were also popular with the military as with the M-2 carburetor, used on trucks in WW1.We carry a full line of Carter carburetor rebuild kits and related carburetor parts. Carburetor kits for classic, vintage, classic. and marine.
  • ABD 2 Barrel ABD 2 Barrel

    CARTER ABD CARBURETOR PARTS


    Carter ABD carburetor kits and other related parts. Parts for the ABD carburetor are still being produced by a US company, although only the carburetor kits are available.
  • AFB 4 Barrel AFB 4 Barrel
  • AS 1 Barrel AS 1 Barrel

    CARTER AS CARBURETOR PARTS



    The Carter AS is a single bore downdraft carburetor which incorporates two light weight aluminum castings. Readily accessible adjustments and the combined body flange casting make it easy to service. All fuel and vacuum passages are confined to the two castings; calibration points are easy to check and clean in service. All major gasket surfaces are above the fuel level to minimize fuel leakage. A two stage high speed metering control is used to produce instantaneous response to engine demands. One is mechanically controlled and the other is actuated by manifold vacuum.
  • AVS 4 Barrel AVS 4 Barrel
    Carter AVS (Air Valve Secondary) 4 barrel carburetor parts. The AVS carburetor can be mistaken for an AFB. Some of the differences to look for are: AVS's spring load air valve on the top of the secondary air horn. No booster venturies. The AVS carburetors were used on 1968-71 Chrysler products.
  • BB BBR1 Ball & Ball 1 Barrel BB BBR1 Ball & Ball 1 Barrel

    CARTER B&B BALL & BALL CARBURETOR PARTS


    Carter BB carburetor kits, floats, thermostats and other related parts. The Carter BBR1 & BBR2 is also included in this catalog and are interchangeable with the B&B
  • BB1 Updraft 1 Barrel BB1 Updraft 1 Barrel

    CARTER BB1 UPDRAFT CARBURETOR PARTS


    Carter BB-1 updraft carburetor parts including carburetor kits.
  • BBD 2 Barrel BBD 2 Barrel

    CARTER BBD CARBURETOR PARTS


    Carter BBD carburetor kits, floats, thermostats and other related parts.
    Here are some of the various types of the BBD carburetors. BBD with Feedback, 1 1/4" Solid Fuel with Integral Choke, BBD 1 1/4" Solid Fuel with Divorced Choke, BBD 1 1/4" with Divorced Choke, and BBD 1 1/2" with Divorced Choke.
  • BBS 1 Barrel BBS 1 Barrel
    The Carter BBS carburetor is a 1 barrel downdraft carburetor used on Chrysler, Desoto, Dodge, Plymouth & Chrysler Marine applications. 1954-1976. Fortunately many parts are still available for this carburetor including carburetor kits, floats, thermostats and other related carburetor parts.
  • Carter Universal Carter Universal
  • UT 1 Barrel UT 1 Barrel
  • W-0, WO 1 Barrel W-0, WO 1 Barrel
  • W-1 1 Barrel W-1 1 Barrel
    The W-1 was used on: Chevrolet from 1932-1952 The 569S W-1 replacement carburetor was used from 1932-48 Several military vehicles used the W-1 carburetor from 1940-1948. Federal Truck used the W-1 from 1933 to 1934. The Graham-Paige used the W-1 in 1940 on the 107 & 108 Hudson 1935-1936 Hupmobile from 1933 to 1936 Oldsmobile from 1936 to 1938 Packard 1937-39 Pontiac 1933 to 1942 Reo in 19367 Studebaker in 1935 to 1937 Terraplane from 1932 to 1933.

    Is your carburetor missing the carburetor tag? Watch this video to see which W-1 carburetor kit you will need for your carburetor.
  • WA-1 1 Barrel WA-1 1 Barrel
  • WCD 2 Barrel WCD 2 Barrel
  • WCFB 4 Barrel WCFB 4 Barrel
    The WCFB was manufactured by the Carter Carburetor Company starting in 1952 and was used on the Buick Roadmaster and the M-70 models straight 8 engine, carburetor number 894S. Buick used the WCFB until 1956 when it was replaced by the Rochester 4GC and the Carter AFB.

    Cadillac also used the WCFB on some of their vehicles from 1952 to 1957.

    Chevrolet used the Carter WCFB starting in 1955 and used them on some model clear up to 1965. The Chevrolet WCFB has a bigger footprint than the earlier WCFBs and are highly sought after by the classic car enthusiast. Some of these carburetor numbers are: 2022s and 2004s. The WCFB was used on the Corvettes between 1955 and 1965.

    Chrysler used the WCFB in 1955 to 1958 when they switch to the Carter AFB, 4 barrel.

    Desoto used the Carter WCFB from 1955 to 1957. 1956-57 the WCFB was used on the Desoto dual four barrel carburetor setup.

    Diamond T truck used the WCFB on some vehicles from 1955 to 1962, carburetor number 2022s.

    Dodge used the WCFB from 1954 to 1958.
  • WDO, WD-0 2 Barrel WDO, WD-0 2 Barrel
    Carter WDO carburetor parts.
Carter Carburetor

At Mike's Carburetor Parts we offer you a full line of US-made 1, 2 & 4 barrel Carter carburetor parts including top-quality carburetor rebuild kits, choke thermostats, accelerator pumps, jets, metering rods, floats, gaskets, needles & seats, as well as other Carter-related parts. 

As you may expect from Mike's Carburetor Parts, our US-made Carter carburetor rebuild kits are ethanol-resistant and built using the highest quality components that meet or exceeds OEM specifications.

Independently of the carburetor part you require, chances are you can find it below in our extensive Carter online catalog. Nevertheless, if you are having trouble finding what you need then don’t hesitate to contact us by email or call us by phone from 7 AM to 4 PM Mon-Fri Pacific 888 689-975.

Carter Carburetor Company was without any doubt one of the most innovative companies in automotive history. Founded in 1909 by Will Carter the company operated until 1984 when fuel injection technology superseded carburetors and made them a thing of the past (at least for the mainstream automotive market).

Among some of the most outstanding feats achieved by this iconic brand are the waterproof carburetor created specifically for the 4-cylinder Jeep Willys that allowed it to keep the engine running while crossing rivers, as well as the first American four-barrel carburetor used in 1953 on Buick cars, the popularization of the downstream carburetors, the all-aluminum four-barrel AFB carburetor and the Thermo-Quad carburetor that introduced the use of lightweight thermoplastic flotation bowls.

At Mike's Carburetor Parts we count with a huge inventory of high-quality Carter carburetor parts covering a wide range of classic, vintage, performance, and marine applications. 

No matter if you are repairing, tuning, or reconditioning a Carter carburetor, at Mike's Carburetor Parts we offer you best-in-class US-made components and rebuild kits.

Can't find what you need? Contact Us
TOP