WCD, 2 barrel carburetor rebuild kit. Ethanol ready. US made.<br />
Ethanol ReadyUS MakeMeets or Exceeds Manufactures SpecsInstructionsLeather Accelerator PumpViton Tip Needle & SeatIdle Mixture ScrewsMounting GasketFloat Bowl Gasket
TECHNICAL:Run a blunt object around the inside of the leather cup to break any coating left by manufacturer.The vacuum piston has a tendency to get frozen in the well. Keep this in mind when taking the top off. Don't force anything.Soak the carburetor parts overnight in a bucket of carburetor cleaner (any brand will do)Wash all chemicals off of the carburetor with hot water.Run thin wire down all of the small passage ways. Ethanol leaves deposits behind that the cleaner won't get out.Polish the pump well so that the accelerator pump glides freely.Apply a few drops of oil to the leather cup of the accelerator pump before installing.Use silicon spray lubricant on the gaskets. This will keep them from sticking.Make sure the vacuum piston is clean and moves freely. Clean, clean, clean.
Rebuild kit, made in the USA from high quality ethanol ready parts. Everything shown in the photo is included in the kit, additional parts may be purchased by choosing your carburetor type in our main catalog. For additional help including rebuild videos, free manuals, and troubleshooting, please see our technical section.
For additional information see related tabs above.
To make sure you get the correct carburetor kit, please match your carburetor number with the list provided. This kit is good for the carburetor numbers listed only. No return on opened kits.