Carburetor Brass Fittings: Fuel, Vacuum and Choke Fittings

Holley brass fitting. 7/8-20 on the carburetor side. 5/8-18 on the fuel side.

7/8" x 20, 1/2" x 20

1/2" x 20 fuel line side, 3/8" inverted flare carburetor side

Fuel fitting. Male end: 7/8 x 20 threads per inch. Female end: 1/8" pipe. 1" nut. Made in USA

New brass repair fitting.

7/8-20 x 1/2-20

New, brass fuel inlet fitting. Please see the picture for sizes. Typically for the AFB & Quadrajet.

9/16 x 24 threaded end. Barb end take a 3/8 hose.

9/16 x 24, 5/16" hose barb.

1/2" x 20 1/2" x 20

1/8" Pipe

1/8" Pipe 1/2 Nut

3/8 x 1/8

3/8-27 thread

New brass repair fitting.

New brass repair fitting.

New brass repair fitting.

5/8" x 1/4"

7/16" x 24 Both Ends

5/16" 1/8"

7/16-24 1/8 Pipe

16-Jul