1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Ford Autolite Motorcraft
  5. 4100 4 Barrel
  6. Autolite Holley Power Valve 1 Stage 70-100B
Autolite Holley Power Valve 1 Stage 70-100B
Autolite Holley Power Valve 1 Stage 70-100B

Autolite Holley Power Valve 1 Stage 70-100B

15 Review(s)
Your Price: $12.95
Part Number: 70-100B
Availability: In Stock

Choose Options

*
Write a Review
Autolite 4100, 4 barrel power valve, Motorcraft 2100. Also fits many of the Holley 2 ( not 94's) & 4 barrel carburetors. Please select your power valve from the drop down list. 7.5 & 8.5 inch HG are the average size that are installed in the stock engine.

Power valves used to blow out anytime an engine back fired, but today's power valves are designed to last.

Under normal circumstances the power valve size in our carburetor kits are the correct size.

Under not so normal circumstances such as a built up engine, multiple carburetors the vacuum will be reduced and will require a power valve that opens up quicker.

How to read the HG on our power valves. Look at the face of the power valve (the shiny surface). Turn the valve so the number reads correctly and is on the right side. Example 8. Read the number at the bottom. Example 5. You have a power valve with 8.5HG.

The power valve stays closed until it reaches it's rated HG. In the example above the power valve won't open until the vacuum drops to 8.5HG.

High performance and engines with multiple carburetors will have a lower vacuum reading thus requiring a lower power valve.

Determine your power valve size by connecting a vacuum gauge to the manifold and read the HG under power (hold the break on and power up) and divide by 2 and round to the next .5 For example a reading of 15 HG would require a power valve size of 7.5 HG.


Related Items

Item In Cart Float Bowl Vent Brass Tube 17-46
In Stock
Part Number 17-46
(5)
$5.95
Item In Cart Plastic Sleeve Bushing Autolite 4100 2100, 22-52
In Stock
Plastic Sleeve Bushing
Part Number 22-52
(4)
$6.95
Item In Cart Motorcraft Fast Idle Lever 85-100B
In Stock
New Motorcraft choke lever. These are plastic levers that fit over the choke shaft, has a threaded hole for the fast idle screw and a hole for the choke rod. High quality, made in the USA.
Part Number 85-100B
(41)
$10.95
Item In Cart Stainless Steel Check Ball - 5/32
In Stock
5/32" steel
Part Number 90-12
(3)
$0.49

Recently Viewed Items

Can't find what you need? Contact Us
TOP