1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Holley
  5. 4175, 4165 4 Barrel
  6. Carburetor 2 Stage Power Valve 70-1000
Carburetor 2 Stage Power Valve 70-1000
Carburetor 2 Stage Power Valve 70-1000

Carburetor 2 Stage Power Valve 70-1000

8 Review(s)
Your Price: $24.95
Holley & Motorcraft
Part Number: 70-1000
Availability: In Stock

Choose Options

Write a Review
Holley 4 barrel and Motorcraft two stage power enrichment valve. Please be aware that you cannot replace a 1 stage valve with a 2 stage without replacing the valve cover with a larger one.

Price includes 1 power valve only.

When the engine is at idle the vacuum is at the highest and the power valve (enrichment valve) is closed. As the engine speeds up vacuum drops and the power valve opens allowing more fuel into the carburetor.

On a 2 stage power valve such as these, the 1st stage opens up at a certain vacuum, i.e. 7,0 HG. This is at partial power. At close to full power the vacuum drops to very low HG, i.e. .5. This is where the 2nd stage opens allowing even more fuel to get to the main circuit.

The carburetor kits that include a 2 stage power valve are using OE specifications.

For other applications you will need to test the HG by hooking a vacuum meter to the engine and operate the engine at power and full power.

Changing from a 1 stage power valve on a carburetor that requires a 1 stage, to a 2 stage power valve is not recommended. If you aren't sure of what you are doing, you could cause too much fuel to be dumped into the carburetor.

70-68 Replaces Holley 125-208

Be sure the gasket is centered.
If the power valve has a recess for the gasket, then the gasket must fit into the recess.
Spray the gasket on both sides with silicon spray lubricant.
Spread a thin coating of Permatex gasket maker around the edge of the gasket. Do not get any on the face of the gasket. This will help keep fuel from leaking through the gasket.

Related Items

Item In Cart Holley Secondary Throttle Screw 80-231
In Stock
Holley 4 Barrel
Part Number 80-231
Item In Cart Electric Choke Conversion Kit CU1180
In Stock

Choke shaft rotates counter-clockwise to close
1.84" cap diameter
Part Number CU1180
Item In Cart Cotter Pin Assortment - A109
In Stock
Part Number A109
Item In Cart Throttle Lever Bushing 22-17
In Stock
Part Number 22-17

Recently Viewed Items

Can't find what you need? Contact Us