1. Home
  2. Carburetor Parts
  3. by Carb Types
  4. Ford Autolite Motorcraft
  5. 2150 2 Barrel
  6. Autolite & Motorcraft Carburetor Main Jet 120-4
Autolite & Motorcraft Carburetor Main Jet 120-4
Autolite & Motorcraft Carburetor Main Jet 120-4

Autolite & Motorcraft Carburetor Main Jet 120-4

73 Review(s)
Your Price: $5.25
5/16" thread 1100, 1101, 2100, 2150, 4100, 4300 4350
Part Number: 120-4
Availability: In Stock

Choose Options

*
Write a Review
PRICE IS FOR ONE JET

1964 & newer models. This assumes you have a number matching carburetor.

Motorcraft main jets, 1100, 1101, 2100, 2150, 4100, 4300, 4350. Priced per each. These are ordered by size .048, .058, etc. You will find the current jet number stamped on the top of the jet. Order by selecting the jet size from the drop down list. Price is per jet.

These are 5/16" on the threaded end.

Some of the older 2100 & 4100 Autolites are much smaller. Typically 1963 and older (assuming you are 100% sure you know the year of your carb.). This type of 4100 will probably have a plastic lever going to the secondary diaphragm. This type of 2100 & 4100 jet can be found here.



Features
  • Made in USA
  • Number Stamped on Top

Your old jet may have the size stamped on the top or side. 50f=.050, 50=.050



Jet Testing
To determine if you have the correct jets in your carburetor, operate your vehicle for 20 minutes at sustained speeds. Stop and pull a plug. Gray - Good, Black - move down one jet size, White - move up one jet size. Do it all over again until you get a gray plug.

This assumes your engine and electrical system is in good running order.

For moving from sea level to over 5,000 ft. reduce your jet size by .002.

Autolite 1100 Main Jet
Autolite 1100 Jet


Related Items

Item In Cart Motorcraft 2100 2150 Carburetor Float - FL42
In Stock
Fits Most Motorcraft 2 Barrels
Part Number FL42
(36)
$14.95
Item In Cart Motorcraft Fast Idle Lever 85-100B
In Stock
New Motorcraft choke lever. These are plastic levers that fit over the choke shaft, has a threaded hole for the fast idle screw and a hole for the choke rod. High quality, made in the USA.
Part Number 85-100B
(41)
$10.95
Item In Cart Throttle Shaft Ball Stud 10-32 - 22-20
In Stock
Overall length = .833"
Length from top to start of threads = 37/64"
Ball diameter = 1/4"
Thread = 10-32
Part Number 22-20
$4.95
Item In Cart Ford 2150 Replacement Carburetor - N302
In Stock
1974 and later, 302" or smaller engines
Part Number N302
(1)
$199.00

Recently Viewed Items

Can't find what you need? Contact Us
TOP