Carburetor Parts Shopping Cart
Items:
(0)
Total:
$0
Electric Choke Conversion Kit

Electric Choke Conversion Kit

Your Price:$39.00
In Stock
Part Number:CU1110
Includes instructions 
Made in the US

Can be used on the 4300, 4 barrel that used a heat choke mounted on the carburetor.

Fits the 4100 without the spring loaded center. (There is a spring inside the choke housing in the center. The problem with these is that the center post sticks out too far. Fortunately we don't run into these very often.) Known spring loaded numbers: C4SF-B

Assuming original manifold / carburetor, fits:
1970 American Motors 304, 360 Motorcraft 2 barrel
1971 American Motors 304, 360 Motorcraft 2 barrel
1972-73 American Motors 304, 360 Motorcraft 2 barrel
1974 American Motors 304, 360 Motorcraft 2 barrel
1975 American Motors 304, 360 Motorcraft 2 barrel
1976 American Motors 304, 360 Motorcraft 2 barrel
1977-78 American Motors 304, 360 Motorcraft 2 barrel

1961-67 289, 352, 390, 428 Ford Autolite 4100
1965 Ford 260, 289, 352  2 barrel
1966 Ford 289, 340, 352, 428 2 & 4 barrel
1966 Ford 410, 428 4 barrel
1967 Ford 289, 390, 428 Motorcraft 2 barrel
1968 Ford 302, 289, 390, 428 Motorcraft 2 barrel
1969 Ford 302, 351, 390, 428, 429 Motorcraft 2 barrel
1970 Ford 390, 429 Motorcraft 2 barrel
1971-72 Ford 302 A/T Motorcraft 2 barrel
1971 Ford 302 Motorcraft 2 barrel

1984 Ford Truck 302 2 barrel
1985-86 Ford Truck 171, 302, 351 2 barrel

1970-72 Jeep 304, 360 2 barrel Motorcraft
1973-76 Jeep 304, 360 2 barrel Motorcraft
1977-78 Jeep 304, 360 2 barrel Motorcraft
1979 Jeep 304, 360 Motorcraft 2 barrel

Due to technical reasons, electric choke kits are matched using the engine application. It is assumed that the carburetor, intake manifold and engine are original to the vehicle.

Examples of miss match:
Carburetor has been switched out.
The carburetor has been re-manufactured. 
A performance intake manifold has been installed. This is OK if the manifold is a direct replacement.
Spacers have been added to the carburetor base - Divorced chokes only.
5 Stars
owner, hobby car builder
I am happy to say that this choke worked GREAT! Very easy to install and it gave me instant gratification. Hooked it up to my 2 barrel on a ford 289. Much nicer then the old manifold type choke. I am not a mechanic and I feel that anyone who can read and has a small understanding of what a carburetor does can easily install this choke, One of my better buys Thanks Mike for a nice set up.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Capitola, CA. on 7/29/2018
5/5
5 Stars
CU 1110 KIt
Installed this kit per instructions into a 65' Mustang's 289" engine with it's original 4100 C5ZF-D Carburetor. The distributor has the Pertronix Electronic conversion along with matching Pertronix Flamethrower coil. C-4 auto transmission, and stock dual exhausts. Otherwise, the engine and drivetrain are completely stock. The air cleaner is the 14" round chrome filter with K & N element installed. Started car and it runs and drives fine. Had to adjust the choke housing cover one notch leaner. Our temperatures generally are 70 to 75 at night and 85 to 90 degrees. Once it becomes cooler in the fall probably moving the choke housing cover back to the middle will work well.
Did you find this helpful? 
Reviewed by:  from Hawaii. on 7/8/2018
5/5
4 Stars
none
So far so good. 45 deg. this morning, choke worked great.
Did you find this helpful? 
Reviewed by:  from Alvin. on 4/16/2018
4/5
5 Stars
Mr
Installed on my 302 1969 Mustang 2bb and it worked great. I installed a new wire harness over the winter and it came with the carb choke wire. I wired per the instructions and I did not have to adjust a thing. works great
Did you find this helpful? 
Reviewed by:  from Denver. on 4/9/2018
5/5
5 Stars
Awesome
I installed this kit on my 77 CJ5 with the AMC 304, Motorcraft 2100 carb. I have never been happy with the stock choke operation. This kit was easy to install with great instructions. Works extremely well! Great quality and price!
Did you find this helpful? 
Reviewed by:  from Lake Stevens, Wa. on 2/23/2018
5/5
5 Stars
owne
just installed. easy to install, works well immediately. will have to wait and see long term. so far very satisfied with order process, delivery, ease of installation and early performance.
Did you find this helpful? 
Reviewed by:  from 4214louisiana avenue. on 2/1/2018
5/5
5 Stars
Owner
Part worked well
Did you find this helpful? 
Reviewed by:  from ELY Nevada . on 12/17/2017
5/5
5 Stars
Software Engineer
Finished installation and items works great.
Did you find this helpful? 
Reviewed by:  from Lancaster, CA. on 12/16/2017
5/5
5 Stars
ShadeTree Mechanic
Awesome automatic choke for my 65 Ford Mustang with a Motorcraft 2BL Carb. Mine caught fire and the black cap melted along with the plastic choke cam. Both of them I found at Mike's Carburetor Parts after hours of searching everywhere for a replacement. Thanks Mike!
Did you find this helpful? 
Reviewed by:  from Lewisville, TX. on 10/24/2017
5/5
4 Stars
Electric Choke review
Good quality and easy well written instructions. The only problem I found was placing the large red cap over the Choke hot air inlet. This restriction allows the vacuum to automatically pull down on the choke piston upon start up and opens the choke fully within seconds whereas, without the cap, the choke opens as it is supposed to, gradually.
Did you find this helpful? 
Reviewed by:  from Adelaide, South Australia. on 7/29/2017
4/5

Related Items

Recently Viewed Items

Can't find what you need? Contact Us
Rochester 2G 2GC Mercarb Carburetor Brass Float
Average Rating(62)
$11.95
[availability]
Carter AFB AVS Edelbrock Brass Float
Average Rating(23)
$7.95
[availability]
Mercarb Carburetor Kit
Average Rating(107)
$43.95
[availability]