Carburetor Parts Shopping Cart
Items:
(0)
Total:
$0
Dashpot Assembly

Dashpot Assembly

Your Price:$17.50
In Stock
Part Number:85-900B
1.7" diameter. Dashpot for automatic transmission type of carburetors. Works on carburetors that can accommodate the 1.7" diameter with modification. Cut the stem to size.

We have a limited number of these left.

Dashpots are used on vehicles with an automatic transmission. When the throttle closes quickly, the dashpot will hold the throttle open momentarily so that any un burned gas will be burned.

3 Stars
Mr.
This dashpot is marketed for the 1964-1966 Mustang but it must be cut and grinded to fit as the pointed end is almost 1/2 too long. I still haven't quite got it perfect yet but I'm working on it!
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by:  from Santa Cruz, CA.. on 4/27/2015
3/5
4 Stars
PURCHASING MANAGER
We modify this part to fit our application by shortening the shaft. This allows the part to function successfully as a substitute for a dashpot that is no longer available. Although it doesn't look like the original, which is a problem in the restoration business, the part serves very well.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from OHIO. on 11/9/2015
4/5
5 Stars
Works well
I bought this for a 1965 mustang 2v carb. As noted by others I had to trim the shaft to length and it works great. It is a good part at a reasonable price. Thank you Mike's carb parts!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Encinitas . on 12/1/2017
5/5
5 Stars
Neil
Many thanks to Mikes. Took a while to find this - only you seem to have it. Fits perfectly on my 1969 L6 200 mustang - carter YF 4198S. Very hard to find and very fast shipping to UK. Really pleased.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Derbyshire, UK. on 8/28/2015
5/5
5 Stars
Design Engineer
Got our part in good time, my son installed it with no problem. Thanks
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from San Diego. on 7/13/2015
5/5
5 Stars
dashpot
difficult to find item, food price, and came quick and as described
Did you find this helpful? 
Reviewed by:  from ny . on 6/6/2018
5/5
5 Stars
Owner
Perfect fit and function at a great price. Shipping was very fast.. Thanks
Did you find this helpful? 
Reviewed by:  from Weeki Wachee. on 4/21/2018
5/5
5 Stars
Mr
Looks good. Had to shorten shaft to fit my 63 Thunderbird. It looks like it will function just fine it's covered up by the air cleaner you can't can't really tell that is not original. Just needed the shaft shortened And littel filing and looks great. Plenty of adjustments to make it fit great item for a Great price.
Did you find this helpful? 
Reviewed by:  from Tehachapi. on 3/23/2018
5/5
4 Stars
Old Man
Received the dashpot, looks OK , waiting on rebuild of carb before I can try. Will have to shorten the rod to fit this application
Did you find this helpful? 
Reviewed by:  from Minnesota. on 3/5/2018
4/5
5 Stars
Assistant Professor
This dashpot assembly works nicely on a stock Solex 34 PICT-3 as found on a 1600cc air-cooled VW. On these early-70s models the non-California dashpot dampens the bottom of the throttle return so a sudden drop to idle doesn't stall the car. Mots are removed after the membrane breaks. This unit has a slightly shorter pushrod, but the threaded post is long enough to adjust it into position (barely).
Did you find this helpful? 
Reviewed by:  from Indiana. on 3/4/2018
5/5

Related Items

Recently Viewed Items

Can't find what you need? Contact Us
Rochester 2G 2GC Mercarb Carburetor Brass Float
Average Rating(54)
$11.95
[availability]
Carter Metering Jets
Average Rating(11)
$5.25
[availability]
Mercarb Carburetor Kit
Average Rating(94)
$43.95
[availability]